All posts by Jestine Yong
-
Detected A Winged Ant Caused Failure Of SONY Multimedia Speaker System SA-WMD40
This Multimedia Speaker System was brought to me by a customer, for whom I restored a similar system which I have already covered in an earlier article. It belonged to his neighbor....
- Posted March 8, 2025
-
A Simple Fix to Dead Welding Machine Brought It Back To Life
One of the regular customers brought me a dead welding machine for repair. He informed me that the machine was dropped while was on and end up not welding (completely dead) Once...
- Posted March 8, 2025
-
A Rare Defect In A Microwave Oven
Appliance: Electrolux modelo MEP41 Defect: Heating active even without command The customer complaint in relation to this appliance was that the heating cavity becomes hot even without issuing any command...
- Posted March 1, 2025
-
Control Board Of LG Washing Machine Restored
The control board of this washing machine was brought to me by a regular customer, who wanted to know whether it could be repaired as the company technician who came to attend...
- Posted March 1, 2025
-
Mini Tactile ON/OFF Switch Confusion
Just came across same looking Two Different Working Types Mini Tactile On OFF Switch under one heading. “6 Pin Push Tactile Mini DPDT ON/OFF Self Locking Switch” One day I...
- Posted March 1, 2025
-
No Disc Error In Rotel CD Player Model RCD-971 Solved
This was brought by a recently added regular customer, with the complaint that it showed ‘No disc’ after trying it with almost all CDs which were being played before in this....
- Posted March 1, 2025
-
Completed Another Advanced Electronics Repair Level 2 Course
Completed today another Advanced Electronics Repair Level 2 Course for 9 participants. Below are the photos taken during the 3 days course: Likes(16)Dislikes(0)
- Posted February 28, 2025
-
Wster WS2911 Karaoke Mic
Received Wster WS2911 Karaoke Mic, stating problem not working. Inspected unit found it powering ON, Speaker also working but Mic is not working. Tried by sliding the Mic Volume but no...
- Posted February 22, 2025