All posts by Jestine Yong
-
Comparing Method To Solve Electronics Problem
Sometimes when comes to electronic troubleshooting, one need to compare with a known good similar equipment for a fast answer. It was really tough especially there is no information on the equipment you are repairing. The information...
- Posted April 22, 2008
-
April Issue Of Nikkei Electronics Magazine
As usual, for me to update some electronics related news is to read the Free Nikkei Electronics Magazine. If you haven’t subscribe, please go to their website and subscribe to get a Free copy deliver to your...
- Posted April 21, 2008
-
Built In H/V Oscillator IC into CPU
I came across before there was a Philip 17″ CRT Monitor where the hv oscillator IC was not found in the mainboard. Instead it was built into the CPU IC. How do i know that? Simple, just...
- Posted April 21, 2008
-
New Techniques In Repairing Electronic Faults?
If you have read my repair article “Electronic Repairing Techniques That Are Yet To Be Discovered” you would have know that i encourage all of my ERG members to always discover new way to troubleshoot a particular...
- Posted April 20, 2008
-
Connecting Zener Diode In Series
How many of you have connected two zener diode in series before? I use this method when i couldn’t get the original part number from the local electronic distributors. For example, Acer aspire have an additional audio...
- Posted April 20, 2008
-
Tube Radio Repair-The Test Equipment That You Need To Have!
Likes(0)Dislikes(0)
- Posted April 20, 2008
-
Tektronix Website
Feel free to browse through Tektronix test equipment website to see if the company have any suitable test equipment that you need. They have oscilloscopes, logic analyzers, signal generator, real time spectrum analyzers and etc. For more...
- Posted April 20, 2008
-
About Bridge Rectifier
Do you know that you can actually make your own bridge rectifier from four individual diode? Yes i have did that many times and some of it can even last longer or better than the original one....
- Posted April 19, 2008




