All posts by Jestine Yong
-
Repair of 31 Year Old Samsung Microwave Oven
My +31 year old Samsung model M6146 Microwave oven manufactured in december 1991 suddenly last week after a loud bang ended its lifelong service. Luckily I still had another old...
- Posted March 3, 2023
-
Rusted Bearing Found In CREATIONSPACE Precision Screwdriver JPJ1802A
This is a good precision screwdriver which I bought long back and was out of use for some months. When I tried to use it one day, it did not work though...
- Posted March 3, 2023
-
Welding Machine Powers On But Does Not Weld Repaired. Model: Straus
A welding technician brought this welding machine for repair and the complaint was it comes one, the fan is running but it does not weld at all. That is...
- Posted March 3, 2023
-
Servicing Four Radios, SONY ICF7600AW – PHILIPS RL118 – SANGEAN SG700L – PHILIPS PRESTIGE 556
One day, I was surprised by one of my regular customers, when he brought three Radios for service. I will provide the details of these below: Case (1) – Sony...
- Posted March 3, 2023
-
Completed The Higher Advanced Repair Level 3 Course
Completed the course for two participants. Both of them came for the level 2 course two weeks ago. One of them will take the level 4 course end of this month. Below are the photos taken during...
- Posted March 3, 2023
-
Open SMPS Transformer Hand-Wound In Mobile Charger TC-70
For a change, this time it was my own device that became defective. My mobile charger conked off one day and I kept it aside for investigation for a later day....
- Posted February 24, 2023
-
Philips CD Sound Machine Repaired
Customer sent me device Model – AZ329 stating problem Not power symptom. On initial visual inspection everything looks OK from outside. Checked power cord for continuity test seems Ok. So...
- Posted February 24, 2023
-
Rejuvenation Of PHILIPS Tuner Amplifier Model AH719
This Amp was one among the few items that I picked up from second sales done by a Technician, who lost vision and discontinued his shop. I paid him a good amount and...
- Posted February 24, 2023












