All posts by Jestine Yong
-
Fungus Attacked SMPS And Defective Loading Motor Found In IBELL IBL3288 DVD Player
This DVD player belonged to a colleague in the hospital and was brought to me with the complaint that CD got jammed inside and it did not work. The funny part is...
- Posted April 8, 2023
-
TV Power Buttons Got Stuck
This tv was brought to me with complaints of not powering on, in fact the power button was dangling at tv front. I remove back case of tv and clean inside, then try to power it but...
- Posted April 8, 2023
-
Gate Controller Board With A Nasty Burn Repaired Using Soldering Mask
A guy next door brought me a gate controller for repair. the guy explained that the board has a nasty burn and a very bad smell but he want it to get...
- Posted April 8, 2023
-
Completed Another Basic Electronics Repair Level 1 Course
Completed today another Basic Electronics Repair Level 1 Course for 3 participants. Below are some photos taken during the 3 days course: Likes(4)Dislikes(0)
- Posted April 7, 2023
-
Four HAVELLS Electronic Fan Regulators Brought Back To Life
Four of these regulators were brought to me by my schoolmate with the complaint that all of them worked only at full speeds (position 5). I pried open the cover and...
- Posted April 1, 2023
-
A Dead Security Camera Was Brought Back To Life
A guy brought this camera for repair and he explained that the camera powers up on a USB charger and sometimes the camera powers on but most of the time it is dead. It is a cheap...
- Posted April 1, 2023
-
A Broken Fan On A Dirty Welding Machine Replaced. Model: Mini 250H
One of my regular customers brought me this welding machine for repair. The customer explained that the welding machine works fine but it goes into shut down on hot days. I got these comments a lot from...
- Posted April 1, 2023
-
Overhauling Mechanism Of Harman/Kardon Cassette Deck HK300XM
This was brought to me by a regular customer friend with the complaint that tape did not work and there were intermittent output problems on one channel. As usual, my first duty...
- Posted April 1, 2023












