Latest News

• 
  Cleaning The Circuit Board First

  One of my procedures before I started to troubleshoot circuit board is to make sure the circuit board is in clean condition. This means I don’t immediately repair the...

  • May 8, 2013
  • 8
• Stubborn Customers

  Have you ever came across stubborn customers? A stubborn customers that would not want to: 1) accept the reasons the equipment is beyond repair 2) would not want to...

  • Posted May 8, 2013
  • 1
• May 2013 Electronics Repair Newsletter

  If you are a first time visitor to this blog and wish to read the May 2013 repair newsletter about “No Power Problem In Sansui DVD Player-Repaired” then you can click HERE to subscribe to...

  • Posted May 6, 2013
  • 4
• 
  LCD TV Backlights Overheating transformer on Samsung LN40B550K1F

  Likes(4)Dislikes(0)

  • May 6, 2013
  • 8
• 
  Observe The Electrolytic Capacitor Carefully

  Usually before I started to repair any electronics equipment I would usually scan through the components first. Many times you could locate the problem by looking at the appearance...

  • May 3, 2013
  • 4
• 
  Congratulation to Beh

  For your information Beh (from Iran) one of our famous article/blog post contributors scored “Excellent” in his online test. His hard work already paid off and I have sent...

  • May 3, 2013
  • 10
• 
  Wire Wound Resistor Specification

  Wire wound resistors are different from the carbon film and the metal oxide film resistors because the values are printed on its body. The values are easy to read...

  • May 2, 2013
  • 36
• Open Primary Winding In Switch Mode Transformer

  SMPS transformer is one of the hardest parts to find in the market. They are uniquely designed and you just can’t walk into any electronics shop and ask for...

  • Posted May 2, 2013
  • 0