Latest News

• Afraid To Try Repair On Equipment That You Are Not Familiar With?

  You are good in repairing your type of electronics equipment such as LCD TV, LCD Monitor, CRT Monitor/TV, Plasma TV and power supplies. Suddenly your customer brought in a...

  • Posted April 30, 2013
  • 0
• 
  Additional Help In Holding PCB Boards

  Having difficulty in holding a PCB board while doing the soldering work? With Panavise products you no longer have a hard time in performing a good soldering work. The...

  • April 30, 2013
  • 0
• 
  Black And Decker Power Screwdriver

  Just bought a battery powered drill/screwdriver by Black and Decker. Previously I had one but the motor and battery already have problem. Getting a new one is much more...

  • April 30, 2013
  • 0
• Sometimes We Need To Thank The Manufacturers

  If you have read my previous post, I did mentioned about certain electronics equipment used non quality components and had a bad design in the circuit. Do you know...

  • Posted April 30, 2013
  • 0
• Some Electronic Circuit Designs Are Just Better Than The Others

  There is no doubt that after so many years in this electronics repairing line I could say that not all electronics equipment have good circuit design. They varied in...

  • Posted April 30, 2013
  • 0
• Common Fault In Electronics Equipment

  No matter what type of electronics equipment  you are repairing there will always be common fault. The common fault can be no power, no display, motor not running, intermittent color...

  • Posted April 30, 2013
  • 0
• 
  Transformerless Power Supply Circuit

  If you have an interesting story to share about common fault, we would like to hear from you-thanks If you intend to build a low voltage power supply without...

  • April 30, 2013
  • 9
• 
  No Medicine To Cure Laziness

  There was a teacher who told my wife “If a student is stupid I can always teach and guide him to be clever but if the student is lazy...

  • April 30, 2013
  • 0