-
A Severe Case Of Surge Voltage Damage In IMPEX LED TV Model GLORIA 32
This TV belonged to an employee working in the grocery shop opposite to my house and was brought to me with the complaint that the mains fuse in their house blew on...
- Posted October 24, 2024
-
Motherboard Debug Card Found Faulty
Three year back I ordered one Motherboard PCI Diagnosis card because I am having few bad OLD generation motherboards with me for repair. For testing I connected this card on...
- Posted October 24, 2024
-
A Flash Light With A Broken Charging Port Repaired. Model: XLM-P70
A customer brought this flash light for repair and told me that it is not powering on any more. He tried to open it with a screw driver but instead he...
- Posted October 24, 2024
-
Periodical Change Of Belts In This HARMAN/KARDON Tape Deck Model HK300XM
This Tape Deck had visited me in November, 2022 for overhauling and replacing its belts. You can see my earlier report of this in the following link: https://jestineyong.com/overhauling-mechanism-of-harman-kardon-cassette-deck-hk300xm/ This revisited me...
- Posted October 24, 2024
-
500 Repair Articles Written By Parasuraman covering 533 items!
Hi All, For your information, Parasuraman had prepared for you a pdf file that contain links to all his 500 written articles. The articles are sorted based on type, model and make for easy reference. You can...
- Posted October 19, 2024
-
A Shorted Water Pressure Control Board Repaired and Maintained
A plumper brought me this device for repair. He said the board was not powering on. There are two LED lights on that board and none of them are coming on indication a fault on it and...
- Posted October 19, 2024
-
Home Theatre Stuck At Standby Repaired
This Jeufel home theater was brought to me with complaint of being stuck at standby mode: when its pluged into ac socket, standby led is on, when on/off button is pressed, nothing happens…. device don’t power on....
- Posted October 19, 2024
-
5V USB Adapter Repaired
Using this adapter with my Magnifier glass since very long time. I was inspecting one PCB for dry solder & found LED in magnifier glass was on & off in...
- Posted October 19, 2024