-
A Faulty Fan On A Welding Machine Replaced and Maintained. Model: ARC-200
A customer brought this welding machine for repair; he said the fan is not spinning at all but he had to use it for a while without any cooling fan running. As...
- Posted October 19, 2024
-
E0 Error Solved In ADELI Induction Cooker Model AL-2000A1
This Induction Cooker (Hereinafter referred to by short form ‘IC’ in this article) had visited me in April 2021 and made a revisit in July 2024 (after more than three years) with the...
- Posted October 12, 2024
-
Aroma Diffuser Heater Repaired
Once I powered the Aroma diffuser in my house & circuit breaker in my house got tripped. Removed aroma diffuser heater from the plug & again set the tripper on...
- Posted October 12, 2024
-
A Dead Player Was Restored Back To Life. Model: Panasonic RX-DU10
A friend of mine brought this dead CD/Radio/Tape player for repair. I powered up the device and it did not show any sign of life so I opened the device to find out the fault. Few screws...
- Posted October 12, 2024
-
Boat Airdrops 121v2 Repaired
Received Bluetooth earbuds for repair, stating right-side unit is not working. Visual inspection I found right side earbud not showing any charging indicator Light. Checked voltages in charging cradle. I...
- Posted October 12, 2024
-
Completed Another Basic Electronics Repair Level 1 Course
Completed today another Basic Electronics Repair level 1 course for 9 participants. Below is a video and photos taken during the 3 days course: Likes(15)Dislikes(0)
- Posted October 11, 2024
-
CIRCA BP Monitor Machine Repair
Received Circa make Blood Pressure Monitor Machine stating problem reading of “SYS mmhg” is stuck around 40 reading and “DIA mmhg” also not increase. I checked the machine, the reading SYS mmhg is stop on value 33...
- Posted October 5, 2024
-
A Bike Control Board That Had A Part Ripped Off Board Restored
A friend of mine who is also a repair technician brought me this board for repair. He explained that a customer brought him this board that had a part ripped off...
- Posted October 5, 2024