Don't Miss

All posts by Jestine Yong

  • Vinverth DVD player No Eject problem solved and amplifier added
    Vinverth DVD player No Eject problem solved and amplifier added

                  I got one Vinverth DVD Player Model VGDP 3218 with the complaint that it was not being used for a long time, and now the tray does not open. As...

    • Posted January 26, 2016
    • 9
  • GT Sound Active Speaker USB Port Not Working
    GT Sound Active Speaker USB Port Not Working

                  The complaint of this local brand GT sound active speakers was no power in the USB unit while other function was working fine.   You can see the USB module...

    • Posted January 22, 2016
    • 5
  • RESTART IN PC REPAIR
    No Display and Restart In PC Repaired

                  My son’s PC was working unsteadily and sometimes restarts on its own and no video out from time to time. This is very obvious the ATX power supply (SMPS) was...

    • Posted January 22, 2016
    • 11
  • PROGRAM EEPROM IC
    What No One Tells You About Data Recovery from Broken EEprom IC

                  Hi folks! I got a couple of days ago a phone call from a company about a sophisticated job, as I told, it is really sophisticated. They ask me to...

    • Posted January 19, 2016
    • 32
  • surround sound system repair
    Chattering Relay Problem in Sony Surround System solved

    I got one Sony Surround System TA-AV550 with the complaint that it was intermittent and crackling noise is heard inside. Tested it on my table and heard relay chattering. As usual, I opened the set and subjected...

    • Posted January 19, 2016
    • 12
  • lcd screen cracked
    How to detect cracked LCD panel without backlight or power on

                    Somebody asked me to repair this Samsung LCD TV Model: LA32R71BAX which is unable to switch on. When I switched it on there is no backlight or sound. The...

    • Posted January 15, 2016
    • 19
  • singer lcd tv repair
    Standby Problem In Singer LCD TV Repaired

      The complaint of this Singer LCD TV was in standby mode. You can see the standby LED in the below photo. Standby problem usually due to few causes such as: 1) MCU IC got 5v/3.3v or...

    • Posted January 15, 2016
    • 8
  • discharge tool
    Build Your Own Capacitor Discharge Probe

                    In another post the subject of how to safely discharge ecaps, A/C start caps, microwave oven caps and even 2nd anode leads on CRT type TV’s was raised. You...

    • Posted January 13, 2016
    • 23
Open

Close