Don't Miss

All posts by Jestine Yong

  • VCR EAT TAPES
    VCR EATS TAPES. THE MOST COMMON CAUSE -Part 2

    Check out part 2 about VCR Eats Tapes By Dave   Likes(10)Dislikes(2)

    • Posted February 6, 2016
    • 2
  • vcreatstapes
    VCR Eats Tapes. The Most Common Cause

    Here is another good video by Dave about VCR Repair. The most common fault in VCR is the “VCR Eats Tapes”. He will show you how to tackle such fault and provide a solution for it. Likes(16)Dislikes(0)

    • Posted February 5, 2016
    • 1
  • remoterepair
    Infrared sensor in TV caused remote control not to work

      Dave my repair friend from the US posted a good video about the explanation of how Infrared sensor in TV caused remote control not to work. You will learn some good tips from him. Likes(19)Dislikes(0)

    • Posted February 5, 2016
    • 1
  • stk442-130 ic
    Little Known Way To Solve Sony Mini Hi Fi Push Power Protect Problem

                  The complaint of this Sony HCD-RV6 Mini Hi-Fi was once you turned it On, you can see the message “Push Power Protect”. If you search from the Internet, it seems...

    • Posted February 2, 2016
    • 25
  • amplifier repair
    Sonodyne SCR2065 brought back to life

    Two Sonodyne SCR2065 Amplidecks were brought to me with a request that at-least one be restored.   These were very popular in India once upon a time, when Cassette Tape Recorders were a fancy!   The sets were...

    • Posted February 2, 2016
    • 21
  • lcd tv inverter board
    Most Popular Way To Modify LCD TV Inverter Board

                  The complaint of this Olan LCD TV was no power so I had to remove the cover in order to perform the troubleshooting job. Once the cover was removed I...

    • Posted January 29, 2016
    • 21
  • PC ASUS P5LD-VM repaired
    No Display In PC ASUS P5LD-VM Motherboard Repaired

                  This PC (ASUS P5LD2-VM/S) was brought to me and the complaint was the Motherboard was fully dead. The lateral cover was dismantled (only two screws) to check on the inside...

    • Posted January 29, 2016
    • 9
  • attend oscilloscope repair
    January 1st, oscilloscope hangover!

                    The first day of the year, still recovering from the New Year’s Celebrations, I had planned to have a lazy afternoon. On my desk laid a board sent to...

    • Posted January 26, 2016
    • 12
Open

Close