All posts by Jestine Yong
-
Odd Jobs Done In This NATIONAL RX-C46F Two-In-One
This set was given to me by a family friend when we two visited their house for a function, with a request that a possible restoration could be attempted without spending...
- Posted December 7, 2024
-
Completed Another Higher Advanced Electronics Repair Level 3 Course
Completed today another Higher Advanced Electronics Repair Level 3 Course for 4 participants. Below are the photos taken during the 3 days course: Likes(14)Dislikes(0)
- Posted December 6, 2024
-
Replacement Of Polarizer Sheets In Acer Monitor Model X163W
I saw a few monitors lying unused in the hospital where I work, because of the bulged polarized sheets. I took one of them one day and tried replacing the sheet assuming...
- Posted November 30, 2024
-
HP Probook Laptop Key Not Responding
Received one HP Probook Stating one key of “ letter E ” on the Keyboard is not responding. On Visual Inspection I found when pressing the key letter E, it is not pressing properly. While pressing the...
- Posted November 30, 2024
-
A Dead Asus Laptop Were Brought Back to Life Partially
A guy next door brought his dead laptop to my shop for repair. The customer said that water was spilled on it last week but the laptop was working the whole...
- Posted November 30, 2024
-
Corrected A Tampered Japanese Make Tascam Model 112R Tape Deck
This was the set brought by a regular customer along with a Sony DVD Player. The complaint on this Deck was that it stopped playing and it was taken to a technician close...
- Posted November 30, 2024
-
A Simple Fix To A Dead Welding Machine Repaired and Maintained. Zika Z-200
This machine was brought to my shop for repair by a welding technician who wanted it to be fixed as soon as possible. The machine was already opened by the...
- Posted November 30, 2024
-
Completed Another Advanced Electronics Repair Course
Completed today another Advanced Electronics Repair Level 2 Course. There was only one participant. He had completed the level 1 course last month and next week will be taking the level 3 course. Below are some photos...
- Posted November 29, 2024












