All posts tagged "Welding Machine Repaired"
-
A Brand New Welding Machine Stops Working After Powering It Up On A Power Generator RepairedA friend of mine bought a brand new welding machine and took it to his property where no power lines are present and the only option was to use it on power...
- Posted August 27, 2022
-
A Bridge Rectifier Replaced In This Welding Machine Restored It Back To LifeA welding technician brought this machine for repair; and while welding, the machine just stopped working and the earth leakage tripped. He called me right away and after few minutes, he...
- Posted August 12, 2022
-
A Dead Turkish Welding Machine Was Brought Back To Life. Model: Weld-200TA welding technician brought this welding machine for repair. He explained that while welding he heard a loud sparking noise coming out of the welding and it went dead....
- Posted July 15, 2022
-
A Turkish Welding Machine With Very Weak Welding RepairedA guy that owns an electrical supply shop brought this machine for repair. The welding on this machine was very weak and needed some attention. Another Turkish welding machine that failed to do a strong welled and...
- Posted June 10, 2022
-
A Broken Fan Replacement On A Tiny Welding Machine. Model: HugongThis welding machine belongs to my brother next door. He is the one who usually tests the machines for me after the repair. It is his machine that needed service...
- Posted May 28, 2022
-
A Welding Machine Shutting Down Due To A Broken Fan RepairedA lot of welding technicians ignore the benefit of having a fan or two inside a welding machine. I am hearing this statement from technicians that as long the machine is up and running it does not...
- Posted February 12, 2022
-
A Dead Welding Machine Was Brought Back To LifeThis machine was brought to my shop for repair and it was dead. If you look closely to the photo, you would see the bad shape the machine was in because it...
- Posted January 21, 2022
-
Shorted IGBT In A Welding Machine ReplacedA welding technician brought this welding machine for repair. As I understood it from the guy, the machine was welding fine then it went into shut down. He tried to connect...
- Posted December 17, 2021
