All posts tagged "atx power supply repair"
-
Maintenance Done In Computer SMPS Lasted For Five Years!
This computer SMPS belonged to the hospital where I worked. It was brought to me with the complaint that it goes off after sometime. I looked through my records and found that it was attended to in...
- Posted May 15, 2022
-
Two Computers SMPS Saved From E-Waste!
I had about four of these Computer SMPS lying around with me, couple of which was taken out of my PC from time to time. One or two might be from a ‘getting-rid-off’...
- Posted April 2, 2022
-
Dry Solder And Dropped Value Of Caps Found In ATX SMPS
In this article the new comers can learn (1) One of the major causes of SMPS switching not taking place (2) Why a total dry solder patch up is necessary in this type of power supplies and...
- Posted February 26, 2022
-
Saved Another Computer SMPS From Dump
This iBall Computer SMPS model LPS223-400 belonged to the hospital where I work. It was brought to me dead. As my IT colleague had already opened the unit and cleaned it...
- Posted February 12, 2022
-
Two SMPS Saved From Dump
These two SMPS units belonged to the hospital where I work. Complaint was both dead! First I checked the AC Adapter and found that the DC wire had got punctured. Nevertheless, I...
- Posted January 28, 2022
-
Saved Two More ATX SMPS From Dump
I request you to refer to my previous article of July, 2018 in connection with the above SMPS : 14 Bad Components Found In Intex SMPS Model Smart IT-2045S+ (Unbelievable)...
- Posted August 16, 2021
-
SMD Resistor Found Burnt And Displaced In Enhance SMPS Model SFX-200D
This was one among the five SMPS brought from my hospital, where I work (now from home only). As the IT-Administrator had already cleaned the inside of this SMPS, it saved my time in doing it. I...
- Posted July 20, 2021
-
Fixed Cap Found Cracked In SUPERCOMP SEP-500 ATX SMPS
This computer SMPS is one among the five brought from my hospital, where I work (now from home). Cleaning was already done by the staff there and that saved my time....
- Posted July 13, 2021