-
A Simple Fix To An Electrical Blanket That Went DeadMy son’s teacher brought me a lot of items to fix and one of these items is an electrical blanket. The strange thing is the electrical blankets are used only in...
- Posted August 25, 2020
-
Dead SONY KLV-40R472A LCD TV Traced To Faulty PFC Adapter And Brought Back To LifeMAKE AND MODEL NO: Sony LCD TV model KLV-40R472A COMPLAINT REPORTED: Now dead. Sometimes it gets on and sometime it does not. HISTORY: This TV belonged to a person living a few houses away, in the same...
- Posted August 21, 2020
-
Welding Machine With Strange But Simple Issue Repaired.A welding technician and his older son brought this welding machine for repair. They mentioned something about the machine welding for one minute or less and then it goes into shut...
- Posted August 21, 2020
-
Lenovo All in One Computer Repaired for Not detecting Hard Disk DriveGiving “Missing operating system Error on Boot” Checked for HDD in BIOS setting it does not show HDD…. For this type of failure- suspected chances of the cause are as follows:...
- Posted August 21, 2020
-
Adjustable Shunt Regulator Found Defective In LG Fridge Inverter BoardMAKE AND MODEL: LG SMPS INVERTER BOARD COMPLAINT REPORTED: Dead TROUBLESHOOTING AND RECTIFICATION DONE: The board was brought by a AC technician and the board was clean enough for me...
- Posted August 19, 2020
-
An Easy Fix to a Professional Audio Device. Model TASCAMAn American guy brought his professional device for repair. The customer explained that the device was deserted for a long time. When he tried to use it again, it did...
- Posted August 19, 2020
-
Facial Sauna Steamer RepairedSymptom: Unit turning ON but water is not getting Hot. Note: This type of heater elements are always on Live AC Current when it Switched “ON”. Never try...
- Posted August 19, 2020
-
Blown Varistor But Mosfets Were GoodA welding technician brought this tiny welding machine for repair. The cause for this dead welding machine was due to the fact it was powered by a power generator....
- Posted August 15, 2020
