All posts tagged "dvd player repaired"
-
Open Run DC Resistor Caused Power Supply Failure In DVD Player
MAKE AND MODEL: OKMC KM15 DVD PLAYER PROBLEM REPORTED: Dead PRELIMINARY INVESTIGATION DONE: Opened and cleaned the set thoroughly. DC supply was missing. Found 220K RUN DC resistor was open. RECTIFICATION DONE:...
- Posted July 21, 2020
-
Burst Capacitor And Bad Strip Wire Found In IGOLD DVD Player
MAKE AND MODEL: iGold IGL-DV05 DVD Player COMPLAINT REPORTED: Dead PRELIMINARY OBSERVATION: After opening and cleaning the set, noticed a bulgy capacitor in the secondary of the power supply-cum-front panel board. TROUBLESHOOTING AND RECTIFICATION DONE: Replaced all...
- Posted July 4, 2020
-
Toroidal Transformer Failed In Cambridge DVD Player
Make and Model: Cambridge Audio – Azur 540C Problem reported: Dead Preliminary observation: Checked and found that the fuse was blown and the primary winding of the toroidal transformer was...
- Posted June 16, 2020
-
LG DVD Player Shutdown Repaired
Customer sent to me this LG DVD Player with the complaint of switched On can see only part of the Hello (HE) and few seconds later shutdown. Generally when you see this kind of fault, you may...
- Posted May 26, 2020
-
Blown High Voltage Capacitor In Power Primary Side
Customer sent to me this Singer DVD system with the complaint of no power symptom. For your information no power symptom can be caused by the power supply board or...
- Posted April 17, 2020
-
Supposed to be not worth to repair but…….
This Philips DVD Player came in with the complaint of no power. This DVD player was supposed to be not worth to repair because it was sent to other...
- Posted February 27, 2020
-
No Power In Pigeon DVD Player Solved And Defective Eye Unit Replaced
This Pigeon DVD Player Model DVD-Clear was brought to me without its remote control (misplaced or lost) with the complaint that it was dead. As usual, the...
- Posted October 2, 2019
-
DVD Player No Power But Not Power Supply Fault
This MAPS DVD player came in for repair with the complaint of no power. As usual, when an equipment is no power the first thing to check is...
- Posted May 4, 2019